OKX app

List of contents of this article:

• 1,OKX app What to do if the computer can't enter the system
• 2, I can't enter the system after the computer is turned on. What should I do?
• 3, What should I do if the computer can't enter the system when it starts up

What should I do if the computer can't enter the system

Modify the startup order: If the computer cannot recognize the hard disk at startup, we can enter Enter the BIOS interface, modify the boot order, and put the hard disk at the top of the device list. In this way, the computer can start the system normally.Check for hardware problems: If there is a problem with the hardware inside the computer, it may need to be replaced or repaired.

If the computer cannot enter the system, you can try the following steps: Check whether the computer hardware is normal, such as whether the power supply, memory, hard disk, etc. are connected or damaged.

Method 1: Restart the computer. First, try to restart the computer, which can usually solve most of the problems. Press the power button and wait for the computer to turn off automatically. If the computer does not respond, you can press the power button for a long time to force the computer to shut down. Wait a moment and press the power button again to start the computer to see if you can enter the system.

I can't enter the system after the computer is turned on. How to deal with it?

Restart the computer. If you can enter the system normally, it means that the last time was just an occasional program or system operation error, and it doesn't matter.

Press the power key to turn off the power when entering the system, repeat about 3 times; click the "Troubleshooting" option, then click "Advanced Options", click "Restart" under "Startup Settings", and select "Safe Mode" after restarting.

When the computer is turned on, it always shows that the icon cannot enter the system, indicating that the computer failed to pass the power-on self-test. You can do the following operations to gradually eliminate and solve the problem. Check the hardware connection. If it shows that the motherboard LOGO cannot enter the system when it is turned on, you need to check whether the hardware connection is normal.

This article will introduce the solution to the problem that the computer cannot enter the system when it is turned on, including two aspects: system problems and network problems. System problem If the computer cannot enter the system when it is turned on, you can try to enter the safe mode, uninstall everything previously installed, including games, restore the system or reinstall the system.

If the computer cannot enter the system after turning on, you can try the following steps to solve the problem: Check the hardware connection: make sure that all cables and cables are firmly connected. You can check the power cord, monitor cable, keyboard cable, etc.

It is a common problem that the computer cannot enter the system when it is turned on. This article will introduce several solutions to you. After the last correct configuration is turned on, press F8 and other shortcut keys to enter the advanced boot option, and select to enter the "last correct configuration". If the problem is not serious, the last correct configuration will be automatically repaired.

What to do if the computer can't enter the system when the computer starts up

1. If the computer can't enter the system when it starts up, you can try to enter the safe mode, uninstall everything previously installed, including games, restore the system or restart Install the system. The network problem may be caused by a network problem if the computer cannot enter the system when it is turned on.

2. Modify the start-up order: such asIf the computer cannot recognize the hard disk at startup, we can enter the BIOS interface, modify the boot order, and put the hard disk at the top of the device list. In this way, the computer can start the system normally. Check hardware problems: If there is a problem with the hardware inside the computer, it may need to be replaced or repaired.

3. There are several solutions to enter the bios settings, press del to enter the bios settings, and load the default settings.