The system version is wrong. Yulong CNC machining simulation software v1 uses rules to show that it cannot be opened because the system version is wrong.Yulong CNC machining simulation software v1 is a simulation software that applies virtual reality technology to CNC machining operation skills training and assessment. It is a powerful simulation software.
When installing, the menu machine version, after the installation is completed, it needs to be cracked. Yulong can't keep up with the times, and most people are using Swo. For example, Yulong 7 can only run in XP and below systems, and cannot be used in win7 or above systems.
It may be installed incorrectly. In addition, Yulong has not been updated for a long time, and Win7 and above are not supported.
Compatibility problems, there will be no such problem when installed on a 32-bit operating system.
System failure. Yulong CNC simulation win10 cannot be opened due to system failure or the failure of related services. You can update the system again or select the safe mode in the advanced selection menu to open it.
After you install it, a folder of "CNC Simulation System" appears, which contains an icon like a phone. In general, it is difficult to click on it first, and then click another icon in the same folder to enter..
Use the Swo CNC simulation software, which displays the tool rail by default. As long as you enter the "automatic" mode, the tool track will be displayed.
The mastercam2021 knife track is not displayed because it is hidden. Solution: Press the Win key to open the start menu. Right-click Properties - in the taskbar - select to automatically hide the taskbar. Then check the locked taskbar.
Tool method: Put the method switch back to the reference point, and press the X, Y and Z direction keys respectively to make the machine tool return to the reference point operation. At this time, the screen will display the coordinates of the tool reference point in the machine tool coordinate system. If the origin of the machine tool coincides with the reference point, the coordinates are displayed as (0, 0, 0).
CNC lathe flankThe method of the system to see the tool trajectory diagram of the program on the screen: click the graphic, press the machine tool lock, spindle lock, and start the cycle.
I have versions 0 and 8 of Yulong CNC simulation system. 0 can be installed directly. After installation, copy the icon in crack to the installation directory (by the way, select the teacher's machine). After that, open the password lock (telephone icon) first, and then turn on the simulation system, and that's it.
If the program name in the first line of the text document is different from this one, the machine tool shows this one.
It can be exported and imported. You first compile a paragraph manually, and then export it. Look at the format and write it according to this format, and you can import it.
It may be your input error: for example, when entering G92, you lose one more digit to become G922. It is also possible that there is indeed a G code that is not supported by the numerical control system, or the simulation software is different from the machine tool, which is supported by the machine tool but not supported by the simulation software. You can analyze it by looking at the program carefully.
Make sure that your computer is equipped with enough memory, storage space and processor performance to run the simulation software. There may be some software conflicts in the computer system. Try to update the software or uninstall other software to solve this problem. The computer has been infected with malware, causing the software to fail to work properly.
Binance download-APP, download it now, new users will receive a novice gift pack.
The system version is wrong. Yulong CNC machining simulation software v1 uses rules to show that it cannot be opened because the system version is wrong.Yulong CNC machining simulation software v1 is a simulation software that applies virtual reality technology to CNC machining operation skills training and assessment. It is a powerful simulation software.
When installing, the menu machine version, after the installation is completed, it needs to be cracked. Yulong can't keep up with the times, and most people are using Swo. For example, Yulong 7 can only run in XP and below systems, and cannot be used in win7 or above systems.
It may be installed incorrectly. In addition, Yulong has not been updated for a long time, and Win7 and above are not supported.
Compatibility problems, there will be no such problem when installed on a 32-bit operating system.
System failure. Yulong CNC simulation win10 cannot be opened due to system failure or the failure of related services. You can update the system again or select the safe mode in the advanced selection menu to open it.
After you install it, a folder of "CNC Simulation System" appears, which contains an icon like a phone. In general, it is difficult to click on it first, and then click another icon in the same folder to enter..
Use the Swo CNC simulation software, which displays the tool rail by default. As long as you enter the "automatic" mode, the tool track will be displayed.
The mastercam2021 knife track is not displayed because it is hidden. Solution: Press the Win key to open the start menu. Right-click Properties - in the taskbar - select to automatically hide the taskbar. Then check the locked taskbar.
Tool method: Put the method switch back to the reference point, and press the X, Y and Z direction keys respectively to make the machine tool return to the reference point operation. At this time, the screen will display the coordinates of the tool reference point in the machine tool coordinate system. If the origin of the machine tool coincides with the reference point, the coordinates are displayed as (0, 0, 0).
CNC lathe flankThe method of the system to see the tool trajectory diagram of the program on the screen: click the graphic, press the machine tool lock, spindle lock, and start the cycle.
I have versions 0 and 8 of Yulong CNC simulation system. 0 can be installed directly. After installation, copy the icon in crack to the installation directory (by the way, select the teacher's machine). After that, open the password lock (telephone icon) first, and then turn on the simulation system, and that's it.
If the program name in the first line of the text document is different from this one, the machine tool shows this one.
It can be exported and imported. You first compile a paragraph manually, and then export it. Look at the format and write it according to this format, and you can import it.
It may be your input error: for example, when entering G92, you lose one more digit to become G922. It is also possible that there is indeed a G code that is not supported by the numerical control system, or the simulation software is different from the machine tool, which is supported by the machine tool but not supported by the simulation software. You can analyze it by looking at the program carefully.
Make sure that your computer is equipped with enough memory, storage space and processor performance to run the simulation software. There may be some software conflicts in the computer system. Try to update the software or uninstall other software to solve this problem. The computer has been infected with malware, causing the software to fail to work properly.
328.31MB
Check929.42MB
Check137.64MB
Check429.63MB
Check688.13MB
Check425.56MB
Check531.73MB
Check641.52MB
Check652.51MB
Check781.67MB
Check591.54MB
Check292.94MB
Check383.37MB
Check482.14MB
Check235.21MB
Check526.39MB
Check947.21MB
Check784.93MB
Check556.29MB
Check736.28MB
Check241.23MB
Check644.44MB
Check464.65MB
Check691.37MB
Check284.54MB
Check973.14MB
Check924.67MB
Check544.53MB
Check736.48MB
Check524.51MB
Check478.72MB
Check731.45MB
Check199.33MB
Check694.18MB
Check547.27MB
Check433.77MB
CheckScan to install
Binance download to discover more
Netizen comments More
1650 飘瓦虚舟网
2025-01-23 04:12 recommend
1692 固步自封网
2025-01-23 03:21 recommend
562 祛病延年网
2025-01-23 02:33 recommend
2525 寻死觅活网
2025-01-23 02:31 recommend
554 宫车晏驾网
2025-01-23 02:24 recommend