OKX download

How to enable Bluetooth in Win7?OKX download For many users, WinDows7 is a very classic operating system. However, in today's digital era, people's demand for computers is also increasing, especially the frequency of using Bluetooth is increasing. So, how to enable Bluetooth in the Win7 system? This article will introduce you to the detailed operation steps and precautions. Step 1: Open the device manager. First, click the computer icon on the computer desktop or in the start menu, find "Management" in the pop-up menu, and enter the management page. Find "Device Manager" in the list and click Open. Step 2: Check the installation of the Bluetooth driver. In the device manager, we need to check whether the Bluetooth driver is installed normally. Bluetooth devices usually belong to "Network Adapter" or "Other Devices" in the Device Manager. If a yellow exclamation mark appears on the Bluetooth device, because the Bluetooth driver is not installed or updated correctly, the driver needs to be reinstalled or updated at this time. Step 3: Enable Bluetooth device. If the Bluetooth driver has been installed, you need to go to "Control Panel" -> "Hardware and Sound" -> "Bluetooth Device" -> "Change Settings" to open the Bluetooth device. In the "Change Settings" interface, check "Allow Bluetooth device to find this computer" and "Allow this computer to send files to Bluetooth device", and then click the "Apply" button. Step 4: Search for nearby Bluetooth devices. After enabling Bluetooth devices, we need to search for nearby Bluetooth devices in order to pair with them. In "Control Panel" -> "Hardware and Sound" -> "Bluetooth Device", click the "Add" button. At this time, a wizard window will pop up, and follow the instructions to add the surrounding Bluetooth devices to the computer.Step 5: Pairing Bluetooth devices. In the process of adding Bluetooth devices, you need to pair Bluetooth devices. If the device has been paired with the computer, you may not need to enter the pairing code again, but if it is the first pairing, you may need to enter the pairing code. This pairing code can be found in the device identifier, which is usually a four-digit number. Precautions: 1. Make sure that the Bluetooth adapter has been installed on the computer (which is usually a small USB device). Two. Make sure that the Bluetooth device is turned on. 3. Make sure that the distance between the equipment and the computer is no more than 10 meters. Four. Bluetooth devices need to be paired with the computer before use, otherwise they cannot be connected normally. 5. If you can't find the other party because of a computer or Bluetooth device setting problem, you can try to turn off/turn on the Bluetooth device and search again.Summary: As a classic operating system, the operation of Bluetooth in Win7 is relatively simple. You only need to follow the above steps to easily enable and connect Bluetooth. Of course, when using Bluetooth on a daily basis, you also need to pay attention to some common problems, such as signal strength, distance between devices, etc. Only by comprehensively considering these problems can we make better use of Bluetooth devices and make more convenience to our lives.

Contact Us
Phone：020-83484626